Are you looking to get the most out of your next project? The CP10 Series from PULS offers an ultra-compact, single phase power supply that breaks all barriers for performance and size. This 240w DIN-Rail single-phase power supply boasts a global input range, active power factor correction, and an unmatched efficiency rating of 95.2% in its power class. It offers a low level of heat generation at a 35% reduction from the current 60mm width typical of most current 240w power supplies.

The CP10 is exceptionally light (600g), very robust, and available in 4 different output voltages making them well suited for most applications. Need ATEX, IECEx, or Class 1 Division 2? No problem!

CP10 Series Features:

AC 100-240V Wide-Range Input20% Output Power Reserves - 12 Amps @ 45°C and belowHigh Peak Current Capability to Trip Protective DevicesActive Power Factor Correction (PFC)Patented Circuitry provides Minimal Inrush CurrentFull Power Between -25°C and +60°CDC-OK Relay ContactUl/cUL listedATEX, IECEx, & Class 1 Division 23 Year Warranty

SIZE MATTERS

10A Size Comparison

For more information or a product demo contact DC Controls

The 7F series of filter fans are dedicated to maintaining constant temperature in control panels and enclosures.

Features:

Reversible air flowVery low acoustic noiseEasily replaceable filterMinimal depth within enclosuresOperating voltage: 24 V DC, 120 or 230 V AC (50/60 Hz)Protection category: IP 54Dimensions from 92 mm up to 177 mm

The size of the Exhaust Filter should match the size of the Filter Fan to achieve the best ventilation within the cabinet.

Features:

Quick replaceable filterProtection category: IP 54Dimension from 92 mm up to 177 mm

Mounting arrangement of Filter Fans and Exhaust Filters

For more information or a product demo contact DC Controls

HS Range - Mechanical Hinge Switches

The HSM (Die Cast) and HS-SS (Stainless Steel 316) Hinge Switches both have a mirror polished finish and are designed to be mounted for interlock position sensing of hinged moving guards.

Designed to be fitted to the hinged axis of machine guard doors and provide a robust hinge function in addition to interlock position sensing.

Positive opening contacts in accordance with IEC 60947-5-1 and after fitting the switch offers a very high degree of anti-tamper.

Used to mount the machine guard door into the machine guard frame and contact blocks are available in slow make/break 3NC 1NO, or 2NC 2NO.

Enclosures are protected to IP67 / IP69K with a low profile, hygienic design for washdown.

Operation of the switches is achieved by the rotating action of a cam and actuator to cause deflection of the switch plunger.

Positive actuation of the contacts is achieved at only 6 degrees of opening of the guard and can be adjusted up to 12 degrees if required upon installation.

HS-Z Range - Electronic Hinge Switches

The HSM-Z (Die Cast) and HSM-SS-Z (Stainless Steel 316) Intelligent Series Hinge Switches have been developed to provide and maintain a high level of functional safety.

Will connect to most popular standard Safety Relays to maintain a PLe Safety Level even with switches connected in series. A maximum of 30 switches can be connected in series.

Easy to understand LED diagnostic functions and provides auxiliary outputs for extra diagnostic signals to PLCs or computers.

Designed to be mounted for interlock position sensing of hinged moving guards and designed to be fitted to the hinged axis of machine guard doors to provide a robust hinge function in addition to interlock position sensing.

Enclosures are protected to IP67 / IP69K with a low profile, hygienic design and is perfect for high pressure, high temperature washdown with detergents.

The HS-Z hinge switches must be used in combination with a dual channel safety control device e.g. Safety Relay or Safety Controller. They can provide protection to Ple/Cat.4 to ISO 13849-1, and will maintain Ple with other Idem Z-type switches connected in series due to internal test functions of the switches. In addition, each switch provides input, output and guard state LED’s.

Operation is achieved by the rotating action of an enclosed cam profile and sensing components within the switch.

These hinge switches can be adjusted upon installation to provide guard-open output signal anywhere between 0 to 10 degrees.

All HS-Z switches are factory set to provide the guard open output signal at 3 degrees. Once set during

installation the HS-Z is permanently pinned in order to provide a fully tamper-resistant switching point.

For more information or a product demo contactDC Controls

The FT 55-CM is an intelligent color sensor that can distinguish up to twelve colors. It offers a wide operating range, combined with its flexible color detection. It also has reliable brightness detection regardless of distance. Color sensors usually struggle with the fact that object brightness is evaluated differently according to distance. SensoPart has solved this issue with patent-pending distance correction technology. This enables consistent brightness evaluation across an operating range up to 65mm, guaranteeing stable processes, even when objects are not supplied in the correct position.

The FT 55-CM is equipped with an IO-Link interface. Allowing for fast and user friendly communication for setup and switching between different sensor configurations. You can also output color value via IO-Link.

Overview of Software Functions

Sensor Modes:

Color Mode - Inspection and evaluation of colors. This mode checks whether a taught color is available within given tolerance.

Best Fit - Sorting and assignment of colors. This mode requires the teach-in of at least 2 colors. The sensor then decides which of the two is the closes to the color currently viewed.

Settings:

Tolerances - 9-level tolerance ratingsBrightness detection speed - Adjustable speed and averaging rate.Link or exclude colors

Smart Functions:

CounterDelayOne ShotAutodetect / PNP/NPN

Inputs & Outputs:

TriggerIO-LinkBinary Output

For more information or a product demo contact DC Controls

Curious how much you can do with a compact safety controller? The software for Wieland's SamosPro compact is a free, download it today and see the difference.

Below are just some of the features of the SamosPro Compact.

Up to 300 function block program sizeCustomizable blocks with up to 16 input and 16 outputs.Only 45mm wide footprint!Up to 20 safe inputs and 8 safe outputs (expandable to 116 inputs and 56 outputs).EtherNet IP, CANopen, ProfiBus, ProfitNet, EtherCAT, and Modbus communications.High switching outputs up to 4 Amp lets you eliminate contractors or relays.

Contact DC Controls today for more information or a demo.Click Here for more info.